Product ID:SUN-PROOF S/G LATEX HOUSE AND TRIM, 78-851
MSDS Date:06/04/1990
FSC:8010
NIIN:00N038417
MSDS Number: BQXMG

PPG INDUSTRIES INC

260 KAPPA DR
PITTSBURGH, PA 15238
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555;800-441-9695

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

NO INCR RISK OF CANCER FROM EXPOS. POTNTL FOR INHAL

RTECS: 9999999ZZ

LIMITED. SINCE OVEREXP IS NOT EXPECTED, THERE IS NO

RTECS: 9999999ZZ

WHICH MAY CAUSE KIDNEY & LIVER DAMAGE & WHICH HAS

RTECS: 9999999ZZ

EVIDENCE OF THESE EFTS HAVE BEEN FOUND IN HUMANS.

RTECS: 9999999ZZ

EXPOS LIMITS, THE LEL BELOW STATED LIMIT & TO REMOVE

RTECS: 9999999ZZ

COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

EXPOS LIMITS, THE LEL BELOW STATED LIMIT & TO REMOVE

RTECS: 9999999ZZ

COATED WITH THIS PRODUCT.

RTECS: 9999999ZZ

PIGMENTS

Fraction By Weight: 5-10%

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 2-5%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: 2-5%

OSHA PEL 50 PPM,C

ACGIH TLV: 50 PPM,C

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

PROPIONIC ACID, 2-METHYL-, MONOESTER WITH

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: 2-5%

WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 70-75%

FILMS, FORMERS, RESINS & ADDITIVES

Fraction By Weight: 65-70%

ZINC COMPOUNDS

Fraction By Weight: 1-2%

HAZ FOR HUMANS IS LIMITED. PROD CNTNS

RTECS: 9999999ZZ

DIOXIDE DUST IN LONG-TERM STUDY DEVELOPED LUNG

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL OR FATAL.
EYE:CAUSES IRRITATION. SKIN:MAY CAUSE SLIGHT IRRITATION.
INHAL:VAP/SPRAY MIST MAY BE HARMFUL. SANDING & GRINDING DUSTS MAY
BE HARMFUL IF INHALED. VAP GENERATED AT ELEV T EMPS IRRITATES
EYE/NOSE/THROAT. CHRONIC:AVOID LONG TERM & RPTD CNTCT. PROD CNTNS A
FORM OF CRYSTALLINE(EFTS OF OVEREXP)
Explanation of Carcinogenicity:SILICA, CRYSTALLINE-QUARTZ: IARC GP2A
(SUPP7,P341, 1987) ANTICIP TOBE A CARCIN (NTP 6TH ANN RPT, 1991).
Effects of Overexposure:HLTH HAZ:SILICA WHICH IARC ASSOC W/AN INCR
CANCER RISK IN LAB ANIMALS. LONG-TERM EXPOS TO CRYSTALLINE SILICA
MAY ALSO LEAD TO A DISABLING DISABILITY KNOWN AS SILICOSIS. THESE
EFTS ARE ASSOC W/BRTHG EX CESS AMTS OF SILICA DUST. APPLIC OF PROD
IS NOT EXPECTED TO GENERATE EXCESS AMTS OF RESP SILICA, SO THE
POTNTL (ING 8)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST:DO NOT INDUCE VOMITING. EYE:FLUSH IMMEDIATELY WITH
PLENTY OF WATER FOR AT LEAST 15 MINUTES. SKIN:REMOVE PROMPTLY BY
WIPING, FOLLOWED BY WATERLESS HAND CLEANER & SOAP & WATER.
INHAL:MOVE TO FRES H AIR. APPLY ARTF RESP & OTHER SUPPORTIVE
MEASURES AS REQ. IF ANY OF THE FOLLOWING OCCUR DURING/FOLLOWING USE
OF PROD, CALL POIS CTL CTR, EMERG ROOM OR MD IMMED. HAVE MSDS INFO
AVAIL. INGEST:(SUPDAT)

Flash Point Method:PMCC
Extinguishing Media:NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY CHEM OR
UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING NFPA CLASS
(SUPDAT)
Fire Fighting Procedures:WEAR NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP
. WATER SPRAY MAY BE INEFTIVE BUT MAY BE USED TO COOL CLSD CNTNRS
TO PVNT PRESS BUILDUP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAXIMUM VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESP AND SKIN PROTECTION SHOULD BE PERMITTED IN AREA.
REMOVE ALL IGNITION SOURCES. TAKE UP SPILLED MATERIAL WITH SAWDUST,
VERMICULITE, OR OTHER A BSORB MATL & PLACE IN NON-LEAKING CNTNRS
FOR DISP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QUANTITIES IN BUILDINGS DESIGNED AND PROTECTED FOR STORAGE OF NFPA
CLASS IIIB COMBUST LIQS. PROT FROM FREEZING.
Other Precautions:IF MATERIAL IS PART OF A MULTIPLE COMPONENT COATING
SYSTEM, READ THE MSDS FOR THE OTHER COMPONENT BEFORE BLENDING AS
THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A
NIOSH/MSHA APPROVED SUITABLE RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOLUME & PATTER
TO KEEP CONC OF INGREDS LISTED BELOW LOWEST SUGGESTED (ING 14)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:CHEM-TYPE SPLASH GOGGLES
Other Protective Equipment:IMPERMEABLE APRON.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXTING MEDIA:IIIB COMBUSTIBLE LIQ FIRES. FIRE FIGHT PROC:AUTOIGNITION
OR EXPLOSION WHEN EXPOSED TO EXTREME HEAT. IF WATER IS USED, FOG
NOZZLES ARE PREFERABLE. HAZ DECOMP PRODS:FUMES INCLUDING CARBON M
ONOXIDE, ZINC OXIDE. FIRST AID PROC:EXCESSIVE EXPOSURE TO CORR
MATL, PERSISTENT EYE/SKIN IRRIT OR BRTHG DIFFICULTIES.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<18
Vapor Density:HVR/AIR
Spec Gravity:1-1.3
Evaporation Rate & Reference:<38 (BUTYL ACETATE=1)
Solubility in Water:<74%
Appearance and Odor:VISCOUS LIQ W/ODOR CHARACT OF THE CHEMICAL
FAMILY/SOLVS LISTED IN ING SECTION

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PRODS WHEN
HEATED. WELDING, BRAZING, OR FLAME CUTTING ON SURFS COATED W/PROD
MAY PRODUCE(SUPDAT)

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL AND LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WAS TE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.